Bellinzoni 041CSTR05 Consolidator Impregnator, Clear
Bellinzoni 041CSTR05 Consolidator Impregnator is a clear siloxane solvent-based consolidation agent designed to protect buildings and stones from water, grease, and moisture penetration. It is specifically formulated to prevent water penetration, moisture damage, and the harmful effects of acid rain on buildings and stone artifacts. Additionally, it has a consolidating action on friable and corroded stones, preventing further deterioration and transforming the stone into a ruined mass. The product also prevents the calcification of marble and stones caused by atmospheric agents, smog, and acid rain. It is perfectly invisible and does not alter the original color of the treated parts, providing a natural appearance. Furthermore, it prevents the formation of mold and significantly reduces the resurfacing of any salts present in the substrate or stone.
– Clear siloxane solvent-based consolidation agent
– Protects buildings and stones from water, grease, and moisture penetration
– Consolidating action on friable and corroded stones
– Prevents calcification of marble and stones caused by atmospheric agents, smog, and acid rain
– Invisible and does not alter the original color of treated parts
– Prevents the formation of mold
– Reduces the resurfacing of salts in the substrate or stone
– Specific weight at 20°C: 0.80±0.02
– Hydro-soluble: non-soluble
– pH: N.D.
– Drying time at 20°C (68°F): 45-60 minutes*
– Full drying time: 8 hours*
– U.V. Resistance Long waves 365 nm: Excessive (no changes after 48 hours of exposure)
– U.V. Resistance Short waves 254 nm: super slow (no changes after 48 hours of exposure)
– Storage at 20°C (68°F): 24 months in original packaging
1. Ensure that the surface is clean and dry. Remove any stains, mildew, or crust before applying the product.
2. Application can be done using a brush, roller, or gun. It is recommended to apply the product with a brush as much as possible to allow better penetration into the stone.
3. Apply the product to the brush and exert pressure to facilitate penetration into frames and cavities.
4. Continuously repeat the application without interruption until the stone is saturated and no longer absorbs the product.
5. The temperature of the support should be between 10 and 30°C during application and drying. If applying to a floor with an underfloor heating system, turn off the heating and let the stone cool completely.
1. Can this product be used on all types of stones?
Yes, Bellinzoni 041CSTR05 Consolidator Impregnator can be used on marble, granite, stones, concrete, terracotta, and wall bricks.
2. Does it alter the appearance of the treated parts?
No, the product is perfectly invisible and does not give a wet or shiny appearance to the treated parts, keeping the original color unchanged.
3. How long does it take to dry?
The drying time at 20°C (68°F) is approximately 45-60 minutes, and the full drying time is 8 hours.
4. Does it prevent the formation of mold?
Yes, Strong 2000 prevents the formation of mold on the treated surface.
5. How long can it be stored?
The product can be stored for 24 months in its original packaging at 20°C (68°F).
Bellinzoni 041CSTR05 Consolidator Impregnator is a reliable and effective solution for protecting buildings and stones from water, grease, and moisture penetration. Its clear siloxane solvent-based formula ensures invisibility and maintains the original color of the treated parts. With its consolidating action and resistance to mold formation, it helps preserve the integrity and beauty of various stone surfaces. Whether it’s marble, granite, stones, concrete, terracotta, or wall bricks, this consolidation agent provides long-lasting protection and peace of mind.